5ft (1.5m) Concrete Corner Fence Post

The 5ft (1.5m) Concrete Corner Fence Post is a compact, wet-cast fencing post designed for creating secure 90-degree changes of direction within low-level fence runs. Manufactured from steel-reinforced concrete, it provides a durable alternative to timber corner posts for front gardens, decorative boundaries and landscaping projects.

This corner post features slotted faces arranged to accept compatible fence panels or gravel boards from two directions. Its no-nib design provides clear, uninterrupted slots, allowing suitable fencing components to sit continuously within the post.

With a substantial 125mm x 125mm section, the post provides dependable strength and stability despite its shorter overall length. The 1.5m post is intended for low-height fencing arrangements, subject to the required installation depth and the panel-and-gravel-board combination selected.

Specifications

• Overall length: 1.5m
• Approximate imperial length: 5ft
• Width: 125mm
• Depth: 125mm
• Post type: Corner
• Construction: Wet-cast concrete
• Reinforcement: Steel reinforced
• Slot arrangement: Two-direction corner slots
• Nib: No nib
• Finish: Smooth light-grey concrete
• Installation position: 90-degree fence corners

Key Features

• Strong steel-reinforced concrete construction
• Substantial 125mm x 125mm post section
• Designed for 90-degree changes of direction
• No-nib design provides clear, continuous slots
• Wet-cast manufacture provides a smooth, consistent finish
• Suitable for compatible low-level panels and gravel boards
• Resistant to rot, decay and insect damage

Ideal For

• Low-level garden boundary corners
• Front garden fencing
• Decorative fence panels
• Short closeboard fence panels
• Short waney lap fence panels
• Concrete gravel boards
• Compatible composite gravel boards
• Domestic and landscaping projects

Product Benefits

• Creates a strong and secure 90-degree fence corner
• Provides a durable alternative to timber corner posts
• Does not rot where installed below ground
• No-nib slots allow compatible components to sit continuously
• Concrete construction requires less routine treatment than timber
• Compatible panels and gravel boards can be replaced individually
• Compact length suits lower-height fencing systems

Choosing the Correct Post Length

The correct post length depends on the required finished fence height, the height of any gravel board and the amount of post that must be installed below ground. A 5ft corner post is generally selected for low-level fencing where enough post length remains below ground to create a secure foundation.

Before ordering, calculate the complete visible fence height and confirm that the chosen panels and gravel boards are compatible with the post slots.

Installation

Position the post at the required corner and align both slotted faces with the adjoining fence runs. Check that the post is vertical and correctly oriented before securing it within the foundation.

Use suitable post mix or concrete around the base and support the post while the foundation sets. The required hole size and installation depth will depend on the fence height, ground conditions and local exposure.

Concrete corner posts are heavy and should be handled by enough people or with suitable lifting equipment. Do not force fence panels or gravel boards into the slots, as this may damage the components or post.

Complete Your Fencing Project

Use this corner post with suitable fence panels, concrete gravel boards or DuraPost Prima composite gravel boards.

Complete the installation with suitable post mix and matching concrete fence posts for straight runs, ends and junctions.