- Stock: In Stock
- Model: OLT180
- Weight: 30.00kg
- SKU: OLT180
| Product Information | |
| Finish | Semi-Planed |
| Width | 6ft (1828mm) |
| Depth | 45mm |
| Height | 1800mm |
| Height to Shoulder | 1600mm |
| Type | Omega Lattice Top Fence Panel |
| Colour | Green/Natural |
| Treatment | Pressure Treated |
The 1.8m High Omega Lattice Top Fence Panel combines a solid timber lower section with an elegant curved lattice top, creating an attractive garden boundary that balances privacy, light and decorative detail. Its distinctive domed profile adds a refined finish to both traditional and contemporary outdoor spaces.
The solid lower section provides useful screening for gardens, patios and outdoor seating areas, while the diamond-pattern lattice allows additional light and airflow through the upper part of the panel. This makes the Omega panel a practical choice where privacy is required without creating an entirely enclosed appearance.
Manufactured from pressure-treated timber, the panel is protected against rot, fungal decay and general outdoor weathering. Its semi-planed finish creates a cleaner appearance than rough-sawn fencing while retaining the natural character of timber.
Strong centre rails provide additional support across the panel, helping maintain its shape and stability once correctly installed. The green and natural pressure-treated finish coordinates well with timber posts, gravel boards and other garden landscaping products.
Specifications
- Panel type: Omega lattice top fence panel
- Width: 6ft
- Approximate metric width: 1828mm
- Height to shoulder: 1600mm
- Height to top of dome: 1800mm
- Depth: 45mm
- Finish: Semi-planed
- Colour: Green and natural
- Treatment: Pressure treated
- Top design: Curved diamond lattice
Key Features
- Decorative curved omega-shaped top
- Diamond lattice pattern allows light and airflow through
- Solid lower section provides privacy and screening
- Pressure treated to help protect against rot and decay
- Semi-planed timber provides a neat finish
- Strong centre rails provide additional panel support
- Suitable for modern and traditional garden designs
Ideal For
- Decorative garden boundaries
- Patios and outdoor seating areas
- Front, side and rear gardens
- Creating privacy without completely blocking light
- Traditional and contemporary landscaping
- Replacing compatible decorative fence panels
- Residential garden improvement projects
Product Benefits
- Combines privacy with an attractive open lattice top
- Curved profile creates a distinctive garden feature
- Allows more natural light through than a fully solid panel
- Pressure treatment helps extend the usable life of the timber
- Coordinates with a range of timber and concrete fencing systems
- Individual panels can be replaced if damaged
- Provides a finished appearance on both straight and feature fence runs
Installation
Install the panel between suitable timber posts, slotted concrete posts or another compatible fencing system capable of supporting its dimensions and weight. Check the actual panel measurements and post spacing before setting the posts.
When using timber posts, secure the panel with suitable exterior-grade galvanised screws, panel clips or brackets. Where slotted concrete posts are used, lower the panel carefully into the slots without forcing it.
A suitable gravel board can be installed beneath the panel to raise the timber away from direct ground contact. Ensure the panel is level, evenly supported and securely fixed, particularly in exposed locations.
Apply a suitable end-grain treatment to any timber exposed by cutting or drilling. Timber is a natural material, so minor variations in colour, grain and dimensions may occur.
Complete Your Fencing Project
Use this panel with suitable fence posts, gravel boards and post mix.
Complete the installation with suitable screws, nails and fixings and browse our wider range of decorative fence panels.
