- Stock: In Stock
- Model: 3WAY7
- Weight: 49.00kg
- SKU: 3WAY7
The 7ft (2.1m) Concrete 3-Way Fence Post is a strong, wet-cast fencing post designed for creating secure junctions where three fence runs meet. Manufactured from steel-reinforced concrete, it provides a durable alternative to timber junction posts for domestic, commercial and landscaping projects.
This 3-way post features slotted faces arranged to accept compatible fence panels or gravel boards from three directions. It is suitable for T-junctions, divided boundaries and layouts where one fence run meets another at a right angle.
Its no-nib design provides clear, uninterrupted slots, allowing suitable fencing components to sit continuously within the post. With a substantial 125mm x 125mm section, the post offers dependable strength and stability for lower and medium-height fencing arrangements.
The 2.1m overall length is suitable for selected panel-and-gravel-board combinations, subject to the required installation depth, finished fence height and site conditions.
Specifications
- Overall length: 2.1m
- Approximate imperial length: 7ft
- Width: 125mm
- Depth: 125mm
- Post type: 3-way
- Construction: Wet-cast concrete
- Reinforcement: Steel reinforced
- Slot arrangement: Three-direction slotted
- Nib: No nib
- Finish: Smooth light-grey concrete
- Installation position: T-junctions and three-way fence intersections
Key Features
- Strong steel-reinforced concrete construction
- Substantial 125mm x 125mm post section
- Designed to connect fencing from three directions
- No-nib design provides clear, continuous slots
- Wet-cast manufacture provides a smooth, consistent finish
- Suitable for compatible fence panels and gravel boards
- Resistant to rot, decay and insect damage
Ideal For
- T-junctions within garden boundaries
- Dividing neighbouring fence runs
- Three-way fencing intersections
- Lower and medium-height fencing
- Closeboard fence panel installations
- Waney lap fence panels
- Decorative timber fence panels
- Concrete and compatible composite gravel boards
Product Benefits
- Creates a strong and stable three-way fence junction
- Provides a durable alternative to timber junction posts
- Does not rot where installed below ground
- No-nib slots allow compatible components to sit continuously
- Concrete construction requires less routine treatment than timber
- Compatible fence panels and gravel boards can be replaced individually
- Suitable for a wide range of panel fencing systems
Choosing the Correct Post Length
The correct post length depends on the required finished fence height, the height of any gravel boards and the amount of post that must be installed below ground. A 7ft 3-way post is commonly used with lower or medium-height fence panels where sufficient post length remains below ground for a secure foundation.
Before ordering, calculate the complete visible fence height and confirm that all three adjoining fence runs use components compatible with the post slots.
Installation
Position the post at the required junction and align each slotted face with its corresponding fence run. Check the orientation carefully before setting the post, as all three slots must line up correctly with the adjoining panels or gravel boards.
Use suitable post mix or concrete around the base and support the post securely while the foundation sets. The required hole size and installation depth will depend on the fence height, ground conditions and local exposure.
Concrete 3-way posts are heavy and should be handled by enough people or with suitable lifting equipment. Do not force fence panels or gravel boards into the slots, as this may damage the components or post.
Complete Your Fencing Project
Use this 3-way post with suitable fence panels, concrete gravel boards or DuraPost Prima composite gravel boards.
Complete the installation with suitable post mix and matching concrete fence posts for straight runs, corners and ends.
