- Stock: In Stock
- Model: INTER7
- Weight: 40.00kg
- SKU: INTER7
The 7ft (2.1m) Concrete Intermediate Fence Post is a strong, wet-cast fencing post designed for straight fence runs using compatible fence panels and gravel boards. Manufactured from steel-reinforced concrete, it provides a durable alternative to timber posts for domestic, commercial and landscaping projects.
This intermediate post features slots on both sides, allowing fence panels and gravel boards to continue along a straight boundary between suitable end, corner or three-way posts.
A built-in nib helps support compatible gravel boards securely in position at the base of the fence. This provides a practical seating point during installation and helps maintain a neat, consistent finish along the fence run.
The 2.1m overall length is suitable for lower and medium-height fencing arrangements, subject to the installation depth and the combination of fence panel and gravel board selected.
Specifications
- Overall length: 2.1m
- Approximate imperial length: 7ft
- Post type: Intermediate
- Construction: Wet-cast concrete
- Reinforcement: Steel reinforced
- Slot arrangement: Dual slotted
- Design: Built-in nib for supporting compatible gravel boards
- Finish: Smooth light-grey concrete
- Installation position: Straight fence runs
Key Features
- Strong steel-reinforced concrete construction
- Wet-cast manufacture provides a smooth, consistent finish
- Slots on both sides support a continuous fence run
- Built-in nib helps hold compatible gravel boards securely in place
- Suitable for compatible fence panels and gravel boards
- Resistant to rot, decay and insect damage
- Suitable for new fencing and replacement projects
Ideal For
- Straight garden boundary fence runs
- Lower and medium-height fencing
- Closeboard fence panels
- Waney lap fence panels
- Decorative timber fence panels
- Concrete gravel boards
- Compatible composite gravel boards
- Domestic and commercial fencing projects
Product Benefits
- Provides a durable alternative to timber fence posts
- Does not rot where installed below ground
- Built-in nib helps simplify gravel board positioning
- Dual slots allow fencing to continue on both sides
- Compatible components can be removed and replaced individually
- Concrete construction requires less routine treatment than timber
- Suitable for a wide range of panel fencing systems
Choosing the Correct Post Length
The correct post length depends on the required finished fence height, the gravel board height and the amount of post that must be installed below ground. A 7ft post is commonly used with lower-height fence panels or fencing combinations that still allow sufficient post depth below ground.
Before ordering, calculate the complete visible fence height and confirm that the selected panels and gravel boards are compatible with the post slots and built-in nib.
Installation
Position the post vertically in a suitably sized hole and support it securely while the foundation material sets. Concrete posts are heavy and should be handled by enough people or with appropriate lifting equipment.
Use suitable post mix or concrete around the base and check that the post remains level in both directions. The required foundation size and installation depth will depend on the fence height, ground conditions and local exposure.
Place the compatible gravel board securely onto the built-in nib before fitting the fence panel above. Do not force panels or gravel boards into the slots, as this may damage the components or the post.
Complete Your Fencing Project
Use this post with suitable fence panels, concrete gravel boards or DuraPost Prima composite gravel boards.
Complete the installation with suitable post mix and matching concrete fence posts for ends, corners and changes of direction.
