9ft (2.7m) Concrete Corner Fence Post

The 9ft (2.7m) Concrete Corner Fence Post is a strong, wet-cast fencing post designed for creating secure 90-degree changes of direction within a fence run. Manufactured from steel-reinforced concrete, it provides a durable and long-lasting alternative to timber corner posts for domestic, commercial and landscaping projects.

This corner post features slotted faces arranged to accept compatible fence panels or gravel boards from two directions. Its no-nib design provides clear, uninterrupted slots, allowing suitable fencing components to sit continuously within the post.

With an overall section of 125mm x 125mm, the post offers substantial strength and stability for taller fencing systems. The 2.7m overall length makes it suitable for installations requiring additional post depth below ground or increased finished fence height.

Specifications

• Overall length: 2.7m
• Approximate imperial length: 9ft
• Width: 125mm
• Depth: 125mm
• Post type: Corner
• Construction: Wet-cast concrete
• Reinforcement: Steel reinforced
• Slot arrangement: Two-direction corner slots
• Nib: No nib
• Finish: Smooth light-grey concrete
• Installation position: 90-degree fence corners

Key Features

• Strong steel-reinforced concrete construction
• Substantial 125mm x 125mm post section
• Designed for 90-degree changes of direction
• No-nib design provides clear, continuous slots
• Wet-cast manufacture provides a smooth, consistent finish
• Suitable for compatible fence panels and gravel boards
• Resistant to rot, decay and insect damage

Ideal For

• Garden boundary corners
• Closeboard fence panel installations
• Waney lap fence panels
• Decorative timber fence panels
• Concrete and compatible composite gravel boards
• Tall or substantial fence runs
• Domestic and commercial fencing projects
• Replacing damaged concrete corner posts

Product Benefits

• Creates a strong and secure 90-degree fence corner
• Provides a durable alternative to timber corner posts
• Does not rot where installed below ground
• No-nib slots allow compatible components to sit continuously
• Concrete construction requires less routine treatment than timber
• Compatible panels and gravel boards can be replaced individually
• Longer post length provides flexibility for taller installations

Choosing the Correct Post Length

The correct post length depends on the required finished fence height, the height of any gravel boards and the amount of post that must be installed below ground. A 9ft corner post is commonly selected for taller fencing combinations or installations requiring increased foundation depth.

Before ordering, calculate the complete visible fence height and confirm that the chosen panels and gravel boards are compatible with the post slots. Ground conditions, exposure and the combined weight of the fencing should also be considered.

Installation

Position the post at the required corner and align both slotted faces with the adjoining fence runs. Check that the post is vertical and correctly oriented before setting it into the foundation.

Use suitable post mix or concrete around the base and support the post securely while the foundation sets. The required hole size and installation depth will depend on the fence height, ground conditions and local wind exposure.

Concrete corner posts are heavy and should be handled by enough people or with suitable lifting equipment. Do not force panels or gravel boards into the slots, as this may damage the fencing components or post.

Important Height Information

Depending on the installation depth and fencing components used, a 9ft post may form part of a boundary exceeding common residential height limits. Check applicable planning requirements and property restrictions before installation.

Complete Your Fencing Project

Use this corner post with suitable fence panels, concrete gravel boards or DuraPost Prima composite gravel boards.

Complete the installation with suitable post mix and matching concrete fence posts for straight runs, ends and junctions.